The apparatus is designed for use at medical and prophylactic institutions of a wide profile for prophylaxis and treatment of dermatologic, therapeutic, neurologic, gynecologic, surgical, stomatologic and otorhinolaryngologic diseases. The apparatus use is especially efficient in cosmetologic practice. The apparatus allows to perform procedures simultaneously for two patients in the individual modes. The procedure time is monitored by built-in timers and a sound signal informs of the procedure end. The effect intensity can be corrected during the procedure with visual monitoring.
On the front panel of the control unit there are: switch with green backlight to turn on the power; buttons setting "duration of the procedure (10-20 min)"; buttons for setting the "intensity of the procedure" (darsonvalization mode from 8 to 25 kV and mode of ultraton from 0.5 to 3.5 kV); indicators of the "duration of the procedure"; indicators of "intensity of procedure"; start button; off button procedure.
Medical factors: When high-frequency (22 kHz) oscillations of an electric field of high tension are applied to the body, the following primary physical factors are initiated: corona discharge, arising when the gas-discharge electrode of the apparatus approaches the surface of the body; high-frequency current flowing in tissues; heat released in the discharge gap; ozone and a small amount of nitrogen oxides arising in the air under the action of the corona discharge and penetrating into the pores of the skin; weak ultraviolet radiation generated by corona discharge; weak mechanical oscillations of the nadonal frequency in tissues due to the dipole interaction of cells with an alternating electric field (reverse piezoelectric effect).
The delivery set includes a wide spectrum of electrodes:
cavitary electrode with bushing – 1 pc.
small mushroomlike electrode with bushing – 1 pc.
comb electrode with bushing – 2 pcs.
ear electrode with bushing – 1 pc.
gingival electrode with bushing – 1 pc.
small rectal electrode with bushing – 1 pc.
large rectal electrode with bushing – 1 pc.
nasal electrode with bushing – 1 pc.
wart electrode with bushing – 1 pc.
large mushroomlike electrode with bushing – 2 pcs.
Basic technical data. The device provides an electrical signal at the output in the form of a sequence of pulses with the following parameters: The darsonvalization mode pulse repetition rate (100 ± 10) Hz; frequency of pulse filling (110 ± 50) kHz; - the amplitude value of the output voltage is discretely regulated from the minimum value (no more than 8 kV) to the maximum (from 16 to 25 kV). Ultratone mode: frequency sinusoidal output voltage 22 kHz effective value of the maximum output voltage from 1 to 3.5 kV
Voltage requirements:European standard electric plug
Supply Voltage: 220 volt In the USA, Japan, and UK an adapter will be needed. A NOTE for US customers: you will need to convert US voltage from 110 V AC to 220-240 V AC (you can choose an adaptor for example HERE). The instruction is in English language. Free shipping worldwide.