Product directly from the manufacturer SPINOR company
EHF THERAPY APPARATUS WITH INDIVIDUAL MATCHING OF RADIATING FREQUENCY ACTING ON BAP “STELLA-2”
EHF
therapy apparatus with individual matching of radiating frequency acting on BAP
“Stella-2” (hereunder referred to apparatus) in variation shown in Table 2 is meant
to be used first, for patient treatment with low-intensity radiation of electromagnetic
waves of extremely high frequency (EHF) in the range of 59 – 63 GHz by acting on
biologically active points of body and areas of skin; and second, for use as an
EHF energy source in biomedical researches.
The
apparatus provides automatic and manual turning of frequency in the frequency
(wavelength) range 59 – 63 GHz (5.1 – 4.7mm) by means of generator, as well as
treatment efficacy assessment and individual matching of remedial frequencies
by means of biofeedback unit (BFB) registering BAP electric conductivity (BAP
EC).
The
apparatus can be applied in physiotherapeutic rooms of clinics, hospitals and full-range
medical preventive institutions.
The
apparatus can be used in environments with ambient temperatures between +10°С to +35°С, relative humidity less than 80% at +25°С and atmospheric pressure 84.0-106.6kPa.
2. INDICATIONS FOR USE OF “STELLA-2”
~
Diseases
of the nervous system.
~
Illnesses of the cardiovascular system.
~
Bronchitis,
bronchial asthma.
~
Illnesses of digestive organs.
~
Illnesses of skin and subcutaneous fat.
~
Musculoskeletal
diseases.
~
Gynecological
disorders.
CONTRADICTIONS:
·
undetermined
diagnosis;
·
individual
intolerance to this type of therapy;
·
pregnancy;
·
presence
of implanted devices with autonomous power supply, such as a pacemaker and the
like.
3.
TECHNICAL CHARACTERISTICS
The
apparatus includes a generator with remote EHF-radiator and the biofeedback unit,
formed in single or separate housings.
The
apparatus runs on AC 50Hz with a nominal voltage of 220V. BFB unit variation 01
runs on DC power supply with a nominal voltage of 3V (two 1.5V elements) or on USB
port of a personal computer (PC) with a voltage of 5V.
.
The
apparatus
provides
low intensity non-thermal electromagnetic radiation of millimeter waves in the frequency range of 58.1 – 59.3GHz to 62.7 – 63.7GHz.
In
manual frequency turning mode and in automatic frequency scanning the minimum step
of frequency change is not more than 0.15 GHz. Time of frequency change
throughout the range is within 1-200s.
Output
power of EHF radiation measured in output of the EHF-radiator horn is at least
0.01mW at a fixed frequency of 61 ± 0.5 GHz.
At that, power flow density of EHF radiation is at least 0.003mW/cm2.
3.6.
BFB
unit provides registration of BAP electric conductivity, at that BFB unit electrodes
voltage and current doesn’t exceed 2.7V and 17 µA at open- and closed-circuit respectively.
3.7.
Power
consumption of the apparatus and the generator (variation 01) is not more than
25VA, as for BFB unit (variation 01) is not more than 1.0VA.
3.8.
Overall
apparatus dimensions do not exceed 160х360х250mm, BFB unit (variation 01) – not more than 210х180х80mm, remote EHF-radiator is not more than 80х60х40mm.
Length
of EHF-radiator connecting cable is not less than 1.5m; length of BFB unit electrodes
cable is not less than 1.0m.
.
The
weight of the unpacked apparatus with generator (variation 01) is not more than
5kg, the unpacked BFB unit (variation 01) is not more than 1.0kg.
The
apparatus allows setting a time of procedure for at least 39 minutes with 1
minute step.
3.12.
Operating
mode set-up time after energizing is not more than 2 minutes.
The
apparatus automatically cuts off the EHF radiation after a given time of the
procedure.
The apparatus provides continuous operating with intermittent duty (EHF radiation: 5-30min. is on, 3-5min. is off) for at least 8 hours.
1.
COMPLETENESS
Delivery completeness is in table 2.
Table 2
No. |
Description |
Qty. |
1 |
Apparatus “Stella-2” |
1 |
2 |
Apparatus “Stella-2” variation 01: - generator*, |
1 1 |
3 |
Remote EHF-radiator with connecting cable |
1 |
4 |
Holder for EHF-radiator |
1 |
|