General characteristics:
Coil outer diameter 15cm
connection: USB connector
flexible supply cable and elastic input damper for reels in plastic housing (so the cable does not break)
reliability and beauty of design
quality ABS plastic
The coil is dual-frequency, consisting of two windings nested into each other, which in turn are composite and are made with wires of different sections. This winding option adds an additional harmonic to the main frequency of the coil, which, according to Alexander Mishin, in some cases increases the efficiency of the coil
The coil is recommended as an additional one (does not replace the usual ones).
Like the rest of our flat coils, this dual frequency is a 3 in 1 universal coil. All four ends of the two halves of the nested windings of the bifilar coil are brought out to the USB connector.
The type of coil in this case is determined only by the external connection - if the coil is connected to the generator through a cable without color marking, then it works as a low-voltage capacitive coil.
If the coil is connected to the generator via a color-coded cable, then (depending on the cable used) it works either as a high-voltage capacitive or as a static one. For the buyer, this is a tangible savings - for the price of one, we get three coils that are fundamentally different in action, although in the same housing. Switching modes takes seconds. The cable for high voltage capacitive mode is color coded BLUE.
Connection cables are not included with the coil. They can be purchased separately if desired.
In the high-voltage capacitive mode, the magnetic component of the field is reduced by 80-90 times, and the electrical component (static) is increased by 3-5 times. The normal field indicator with a coil in this mode, as a rule, does not light up.